Tag Archives: Linux

ASSP mod_inst.pl Error After Upgrading Fedora 42 to 43

Posted on by
Reply

I recently upgraded my system from Fedora 42 to Fedora 43 after Fedora 42 reached end-of-life.

When I started ASSP, I received errors indicating that the required Perl modules were incorrect or missing, so I decided to run mod_inst.pl again to reinstall the necessary modules.

I downloaded the latest mod_inst.pl from the ASSP website and ran it, but it immediately failed with the following error:

error calling required module LWP::Simple - Proxy must be specified as absolute URI; 'proxyuser' is not at /usr/local/share/perl5/5.42/LWP/Simple.pm line 30.

After spending quite a while searching for solutions, most references pointed towards issues with the proxy settings. However, my assp.cfg file had blank values for proxyserver, proxyuser, and proxypass, and this configuration had worked fine before the Fedora upgrade.

While debugging mod_inst.pl and mod_inst_ocr.pl, I noticed the following commented-out section around line 722:

###########################################
# please change the following to your needs
#
# uncomment and change the following line(s) if you use a HTTP-Proxy and ENV is not set
#$ENV{HTTP_proxy} = 'http://yourproxy:port';
#$ENV{HTTP_proxy_user} = 'proxy-user';
#$ENV{HTTP_proxy_pass} = 'proxy-user-password';
###########################################

To resolve the issue, I uncommented the HTTP_proxy line and set it to my proxy server:

$ENV{HTTP_proxy} = 'http://10.0.0.1:765';

After making this change, mod_inst.pl ran successfully and installed the required modules without any further errors.

This information may already exist somewhere in the documentation, but I couldn’t find it. Hopefully this helps anyone else who encounters the same issue after upgrading Fedora or Perl.


Installed Radicale3 for hosting my own calendar and contacts data

Posted on by
Reply

So I finally got around to installing something so I can host my own calendar and contacts so that data is not shared with the big four corporate companies.

As I just need basic calendar and contacts functionality I chose the open source project Radicale. As I have run Fedora to control the house and my private data since 1998 I firstly installed the Radicale rpm via DNF.

dnf install radicale

This should install radicale3 as that is the latest version at the time of writing this blog post.

I will be running it off a sub domain of my public domain so I have set that up in the DNS with my main domain hosting company.

I have used a sub domain with a reverse proxy rather than opening another port [5232] on the firewall. I initially set it up with the port open but then rethought my approach as its more secure than to open the port on the firewall.

One other good thing using a sub domain is that you just need to have the proxy settings for that host rather than using location settings with the pathing.

Apache virtual host looks like this

<VirtualHost *:443>
 
 ServerName <subdomain.domain>
 DocumentRoot <pathtodomain>

 ProxyRequests Off
 ProxyPreserveHost On

 <Proxy *>
 Order deny,allow
 Allow from all
 </Proxy>

 # Forward requests to the backend Radicale server
 ProxyPass / http://localhost:5232/
 ProxyPassReverse / http://localhost:5232/

 # Inform Radicale about its location behind the proxy
 RequestHeader set X-Script-Name /radicale

 SSLCertificateFile <path to public key>
 SSLCertificateKeyFile <path to private key>

</VirtualHost>

Set up the config file for radicale to use it locally running on localhost on port 5232 and I am using my dovecot server to authenticate the users.

Then you should just be able to surf to the subdomain and be presented with the login page of the radicale server. Login and add your collections for the calendars and contacts.

Then configuring all the clients should be pretty straight forward for PC, Mac, iOS and Android.

MMEncode is not available on Linux distros any more.

Posted on by
1

Not sure what happened to this or why but its no longer available. I used to have a script that used it to convert binary data to text for attachments on emails. Having searched high and low I came up with a new solution – use openssl.

You can do the same that you were doing with mmencode by doing the following

openssl base64 -e < $FILE

Enjoy.

MySQL pegging CPU after the leap second adjustment.

Posted on by
Reply

So I find that my MySQL database is running high on CPU all of a sudden. I optimize the tables etc and no difference. I hunt around the internet to find that there seems to be a problem with this years leap second adjustment which sends MySQL into orbit.

The solution reset the date

date -s "`date`"

and it dropped back to normal.

Credit goes to this lady here http://www.sheeri.com/content/mysql-and-leap-second-high-cpu-and-fix

BackupPC Has qw(…) Warnings Since Upgrading Perl

Posted on by
1

So since upgrading Perl I am presented with qw warnings coming out of the cron job checking that BackupPC is running.

Use of qw(...) as parentheses is deprecated at /usr/share/BackupPC/lib/BackupPC/Storage/Text.pm line 301.
Use of qw(...) as parentheses is deprecated at /usr/share/BackupPC/lib/BackupPC/Lib.pm line 1412.

The way to get rid of these warnings is to enclose qw in parentheses and Perl processes the foreach parameters without warnings.

Like so

Text.pm (Line 301)

#
# Promote BackupFilesOnly and BackupFilesExclude to hashes
#
foreach my $param (qw(BackupFilesOnly BackupFilesExclude)) {
next if ( !defined($conf->{$param}) || ref($conf->{$param}) eq "HASH" );
$conf->{$param} = [ $conf->{$param} ]
if ( ref($conf->{$param}) ne "ARRAY" );
$conf->{$param} = { "*" => $conf->{$param} };
}

Lib.pm (Line 1412)

foreach my $param (qw(BackupFilesOnly BackupFilesExclude)) {
next if ( !defined($conf->{$param}) );
if ( ref($conf->{$param}) eq "HASH" ) {

Checkpassword-0.90 Compilation Error on Fedora Core 3

Posted on by
1

Ok now next problem that I ran into in trying to get qmail running on the distrubution is that checkpassword-0.90 doesnt want to compile and looking on the web there is 1 arabic website explaining how to get around this which I cant understand but with again more pain I have finally cracked it.

In the source directory of checkpassword you will need to change the error.h file to include errno.h just after the line extern int errno like so…

extern int errno;

#include

then recompile and everything should work. 

POP3: unable to scan $HOME/Maildir?

Posted on by
9

Ok I run qmail here and funny thing was outlook wasnt logging into it. Thought I had been hacked or something. To see what the problem was I telnetted into my qmail box using

telnet mail.farrowcomputing.com 110

port 110 is the port designated to pop3, then put in your username

user  “username”

then password

pass “password”

and on my system was then seeing “Unable to scan $HOME/Maildir” looked into it and had 6000 spam messages, now the limit I have for mails is quite low so you either need to up it or delete some of the messages from the linux box running qmail or you will need to put the softlimit up, ie.

Try to increase the softlimit for pop3d which is found in your pop3d run script such as /var/qmail/service/pop3d/run (for e.g.): 

blah blah… softlimit -m 2000000 to higher value.